68 lines
1.6 KiB
Markdown
68 lines
1.6 KiB
Markdown
---
|
|
title: How to connect to internet in console mode or recovery mode
|
|
description:
|
|
published: true
|
|
date: 2020-07-07T08:04:15.837Z
|
|
tags: documentation, howto, user-guide
|
|
editor: markdown
|
|
---
|
|
|
|
# How to connect to internet in console mode or recovery mode
|
|
|
|
|
|
> Note: This how-to assumes that user has a system where internet was working properly until something went wrong.
|
|
{.is-info}
|
|
|
|
|
|
Sometimes you may need to boot in to console mode or recovery mode instead of Plasma desktop in order to do maintenance or repair.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may find that wifi does not work in these modes.
|
|
|
|
## Wifi
|
|
To connect to wifi from command line you use the `nmcli` command. Example:
|
|
|
|
To determine what device to connect run this command:
|
|
|
|
```
|
|
$ nmcli dev status
|
|
```
|
|
|
|
This will list any available network devices. In this example we know that we are wifi but not wifi-p2p and the command lists wifi device as wlp4s0, so to connect:
|
|
|
|
```
|
|
$ nmcli --ask dev con wlp4s0
|
|
```
|
|
|
|
This should ask for your wifi password and then connect your wifi.
|
|
Now you can do any maintenance or repairs that require internet access.
|
|
|
|
## Ethernet connection
|
|
|
|
If you are using ethernet connection, to connect is basically the same:
|
|
|
|
```
|
|
$ nmcli dev status
|
|
```
|
|
|
|
If your ethernet device is listed as an example as elp4s0:
|
|
|
|
```
|
|
$ nmcli dev con elp4s0
|
|
```
|
|
|
|
The `--ask` option is not normally needed, as your system already has permission for this.
|
|
Wifi permissions are normally separate and unique from system permissions.
|
|
|
|
\-
|
|
|
|
|
|
|
|
|